Array
(
    [ID] => 3425
    [~ID] => 3425
    [IBLOCK_ID] => 26
    [~IBLOCK_ID] => 26
    [CODE] => automatic-pcb-unloader-b023-3u-709
    [~CODE] => automatic-pcb-unloader-b023-3u-709
    [XML_ID] => 3425
    [~XML_ID] => 3425
    [NAME] => Automatic PCB unloader B023-3U-709
    [~NAME] => Automatic PCB unloader B023-3U-709
    [ACTIVE] => Y
    [~ACTIVE] => Y
    [DATE_ACTIVE_FROM] => 
    [~DATE_ACTIVE_FROM] => 
    [DATE_ACTIVE_TO] => 
    [~DATE_ACTIVE_TO] => 
    [SORT] => 2100
    [~SORT] => 2100
    [PREVIEW_TEXT] => This automatic system is intended for PCBs receiving from a previous line conveyor and their loading in special magazines. The unloader is equipped with automatic magazine changing system.
    [~PREVIEW_TEXT] => This automatic system is intended for PCBs receiving from a previous line conveyor and their loading in special magazines. The unloader is equipped with automatic magazine changing system.
    [PREVIEW_TEXT_TYPE] => text
    [~PREVIEW_TEXT_TYPE] => text
    [DETAIL_TEXT] => 

This automatic system is intended for PCBs receiving from a previous line conveyor and their loading in special magazines. The unloader is equipped with automatic magazine changing system.

The table of the B023-3U-709 is equipped with an automatic extractor for PCBs loading into slots of magazine. Magazine’s moving up/down is carried out by means of the lift mechanism. The magazine is setup on the lifting platform and is fixed by mechanical clamps. Magazine presence is controlled by special sensors. Platform movement is carried out on a vertical axis with the preset step, depending on the required PCB arrangement in magazine’s slots. PCB loading can be executed in each slot, every second slot, every third slot etc. The unloader works with 3 magazines. Removal of the filled magazine and setup of the empty magazine is carried out by the operator manually.

[~DETAIL_TEXT] =>

This automatic system is intended for PCBs receiving from a previous line conveyor and their loading in special magazines. The unloader is equipped with automatic magazine changing system.

The table of the B023-3U-709 is equipped with an automatic extractor for PCBs loading into slots of magazine. Magazine’s moving up/down is carried out by means of the lift mechanism. The magazine is setup on the lifting platform and is fixed by mechanical clamps. Magazine presence is controlled by special sensors. Platform movement is carried out on a vertical axis with the preset step, depending on the required PCB arrangement in magazine’s slots. PCB loading can be executed in each slot, every second slot, every third slot etc. The unloader works with 3 magazines. Removal of the filled magazine and setup of the empty magazine is carried out by the operator manually.

[DETAIL_TEXT_TYPE] => html [~DETAIL_TEXT_TYPE] => html [DATE_CREATE] => 20.02.2015 14:24:54 [~DATE_CREATE] => 20.02.2015 14:24:54 [CREATED_BY] => 1 [~CREATED_BY] => 1 [TIMESTAMP_X] => 17.02.2017 15:10:15 [~TIMESTAMP_X] => 17.02.2017 15:10:15 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [TAGS] => [~TAGS] => [IBLOCK_SECTION_ID] => 290 [~IBLOCK_SECTION_ID] => 290 [DETAIL_PAGE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/ [~DETAIL_PAGE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/ [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [DETAIL_PICTURE] => Array ( [ID] => 9469 [TIMESTAMP_X] => 17.02.2017 15:10:15 [MODULE_ID] => iblock [HEIGHT] => 400 [WIDTH] => 328 [FILE_SIZE] => 139824 [CONTENT_TYPE] => image/png [SUBDIR] => iblock/a2d [FILE_NAME] => a2d365fe5cd040c4990bacda91f41ec0.png [ORIGINAL_NAME] => small.png [DESCRIPTION] => [HANDLER_ID] => [EXTERNAL_ID] => 8f967b2e5c287ddcf8bdc3176e757436 [~src] => [SRC] => /upload/iblock/a2d/a2d365fe5cd040c4990bacda91f41ec0.png [ALT] => Automatic PCB unloader B023-3U-709 [TITLE] => Automatic PCB unloader B023-3U-709 ) [~DETAIL_PICTURE] => 9469 [PREVIEW_PICTURE] => [~PREVIEW_PICTURE] => [LANG_DIR] => / [~LANG_DIR] => / [EXTERNAL_ID] => 3425 [~EXTERNAL_ID] => 3425 [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [LID] => s1 [~LID] => s1 [CATALOG_QUANTITY] => 0 [~CATALOG_QUANTITY] => 0 [CATALOG_QUANTITY_RESERVED] => 0 [~CATALOG_QUANTITY_RESERVED] => 0 [CATALOG_QUANTITY_TRACE] => Y [~CATALOG_QUANTITY_TRACE] => Y [CATALOG_QUANTITY_TRACE_ORIG] => D [~CATALOG_QUANTITY_TRACE_ORIG] => D [CATALOG_CAN_BUY_ZERO] => Y [~CATALOG_CAN_BUY_ZERO] => Y [CATALOG_CAN_BUY_ZERO_ORIG] => D [~CATALOG_CAN_BUY_ZERO_ORIG] => D [CATALOG_NEGATIVE_AMOUNT_TRACE] => Y [~CATALOG_NEGATIVE_AMOUNT_TRACE] => Y [CATALOG_NEGATIVE_AMOUNT_ORIG] => D [~CATALOG_NEGATIVE_AMOUNT_ORIG] => D [CATALOG_SUBSCRIBE] => Y [~CATALOG_SUBSCRIBE] => Y [CATALOG_SUBSCRIBE_ORIG] => D [~CATALOG_SUBSCRIBE_ORIG] => D [CATALOG_AVAILABLE] => Y [~CATALOG_AVAILABLE] => Y [CATALOG_WEIGHT] => 0 [~CATALOG_WEIGHT] => 0 [CATALOG_WIDTH] => 0 [~CATALOG_WIDTH] => 0 [CATALOG_LENGTH] => 0 [~CATALOG_LENGTH] => 0 [CATALOG_HEIGHT] => 0 [~CATALOG_HEIGHT] => 0 [CATALOG_MEASURE] => 5 [~CATALOG_MEASURE] => 5 [CATALOG_VAT] => [~CATALOG_VAT] => [CATALOG_VAT_INCLUDED] => N [~CATALOG_VAT_INCLUDED] => N [CATALOG_PRICE_TYPE] => S [~CATALOG_PRICE_TYPE] => S [CATALOG_RECUR_SCHEME_TYPE] => D [~CATALOG_RECUR_SCHEME_TYPE] => D [CATALOG_RECUR_SCHEME_LENGTH] => 0 [~CATALOG_RECUR_SCHEME_LENGTH] => 0 [CATALOG_TRIAL_PRICE_ID] => [~CATALOG_TRIAL_PRICE_ID] => [CATALOG_WITHOUT_ORDER] => N [~CATALOG_WITHOUT_ORDER] => N [CATALOG_SELECT_BEST_PRICE] => Y [~CATALOG_SELECT_BEST_PRICE] => Y [CATALOG_PURCHASING_PRICE] => 0.00 [~CATALOG_PURCHASING_PRICE] => 0.00 [CATALOG_PURCHASING_CURRENCY] => [~CATALOG_PURCHASING_CURRENCY] => [CATALOG_TYPE] => 1 [~CATALOG_TYPE] => 1 [~BUY_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=BUY&id=#ID# [BUY_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=BUY&id=#ID# [~ADD_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD2BASKET&id=#ID# [ADD_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD2BASKET&id=#ID# [~SUBSCRIBE_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=SUBSCRIBE_PRODUCT&id=#ID# [SUBSCRIBE_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=SUBSCRIBE_PRODUCT&id=#ID# [~COMPARE_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD_TO_COMPARE_LIST&id=#ID# [COMPARE_URL_TEMPLATE] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD_TO_COMPARE_LIST&id=#ID# [ACTIVE_FROM] => [ACTIVE_TO] => [CONVERT_CURRENCY] => Array ( [CURRENCY_ID] => RUB ) [MODULES] => Array ( [iblock] => 1 [catalog] => 1 [currency] => 1 [workflow] => ) [CAT_PRICES] => Array ( ) [PRICES_ALLOW] => Array ( ) [IPROPERTY_VALUES] => Array ( ) [PROPERTIES] => Array ( [TITLE] => Array ( [ID] => 69 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Заголовок окна браузера [ACTIVE] => Y [SORT] => 500 [CODE] => TITLE [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12085 [VALUE] => Automatic PCB unloader B023-3U-709 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Automatic PCB unloader B023-3U-709 [~DESCRIPTION] => [~NAME] => Заголовок окна браузера [~DEFAULT_VALUE] => ) [KEYWORDS] => Array ( [ID] => 70 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Ключевые слова [ACTIVE] => Y [SORT] => 500 [CODE] => KEYWORDS [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Ключевые слова [~DEFAULT_VALUE] => ) [META_DESCRIPTION] => Array ( [ID] => 71 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Мета-описание [ACTIVE] => Y [SORT] => 500 [CODE] => META_DESCRIPTION [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12086 [VALUE] => Automatic PCB unloader B023-3U-709 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Automatic PCB unloader B023-3U-709 [~DESCRIPTION] => [~NAME] => Мета-описание [~DEFAULT_VALUE] => ) [RECOMMEND] => Array ( [ID] => 72 [TIMESTAMP_X] => 2013-09-10 10:43:44 [IBLOCK_ID] => 26 [NAME] => Recommend with this product [ACTIVE] => Y [SORT] => 500 [CODE] => RECOMMEND [DEFAULT_VALUE] => [PROPERTY_TYPE] => E [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 26 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => EList [USER_TYPE_SETTINGS] => Array ( [size] => 10 [width] => 0 [group] => N [multiple] => Y ) [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Recommend with this product [~DEFAULT_VALUE] => ) [ZOOM] => Array ( [ID] => 73 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Увеличенное фото в карточке товара (zoom) [ACTIVE] => Y [SORT] => 500 [CODE] => ZOOM [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12087 [VALUE] => 9470 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 9470 [~DESCRIPTION] => [~NAME] => Увеличенное фото в карточке товара (zoom) [~DEFAULT_VALUE] => ) [TECH_DATA] => Array ( [ID] => 74 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Технические данные [ACTIVE] => Y [SORT] => 500 [CODE] => TECH_DATA [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12088 [VALUE] => Array ( [TEXT] => <table class="tech_data"> <tbody> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>The main data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Unloader dimensions (LхWхH)<strong></strong></p> </td> <td width="319" valign="top"> <p>1340 х 1370 х 1650 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Unloader weight<strong></strong></p> </td> <td width="319" valign="top"> <p>230 kg<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Interface<strong></strong></p> </td> <td width="319" valign="top"> <p>SMEMА<strong> </strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Power supply<strong></strong></p> </td> <td width="319" valign="top"> <p>220 V, 50/60 Hz<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Power consumption<strong></strong></p> </td> <td width="319" valign="top"> <p>1,1  kW<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Compressed air supply</p> </td> <td width="319" valign="top"> <p>6-8 Bar</p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB transport height<strong></strong></p> </td> <td width="319" valign="top"> <p>935 ± 35 mm<strong></strong></p> </td> </tr> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>Magazine data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine length<strong></strong></p> </td> <td width="319" valign="top"> <p>535 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine depth<strong></strong></p> </td> <td width="319" valign="top"> <p>580 mm</p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine height<strong></strong></p> </td> <td width="319" valign="top"> <p>570 mm</p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine weight<strong></strong></p> </td> <td width="319" valign="top"> <p>max. 40 kg<strong></strong></p> </td> </tr> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>PCB data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB size (L х W<strong></strong></p> </td> <td width="319" valign="top"> <p>min. 10х522 mm,  max. 510х522 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB thickness<strong></strong></p> </td> <td width="319" valign="top"> <p>0,4-6 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB weight<strong></strong></p> </td> <td width="319" valign="top"> <p>max. 5 kg<strong></strong></p> </td> </tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The main data

Unloader dimensions (LхWхH)

1340 х 1370 х 1650 mm

Unloader weight

230 kg

Interface

SMEMА

Power supply

220 V, 50/60 Hz

Power consumption

1,1  kW

Compressed air supply

6-8 Bar

PCB transport height

935 ± 35 mm

Magazine data

Magazine length

535 mm

Magazine depth

580 mm

Magazine height

570 mm

Magazine weight

max. 40 kg

PCB data

PCB size (L х W

min. 10х522 mm,  max. 510х522 mm

PCB thickness

0,4-6 mm

PCB weight

max. 5 kg

[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Технические данные [~DEFAULT_VALUE] => ) [FLAGS] => Array ( [ID] => 76 [TIMESTAMP_X] => 2017-02-14 15:05:33 [IBLOCK_ID] => 26 [NAME] => Функции [ACTIVE] => Y [SORT] => 500 [CODE] => FLAGS [DEFAULT_VALUE] => [PROPERTY_TYPE] => E [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 33 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => EList [USER_TYPE_SETTINGS] => Array ( [size] => 20 [width] => 0 [group] => Y [multiple] => Y ) [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Функции [~DEFAULT_VALUE] => ) [IMAGE_CHAR] => Array ( [ID] => 77 [TIMESTAMP_X] => 2013-09-02 13:12:06 [IBLOCK_ID] => 26 [NAME] => Картинка характеристики [ACTIVE] => Y [SORT] => 500 [CODE] => IMAGE_CHAR [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => Y [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 12093 ) [VALUE] => Array ( [0] => 6288 ) [DESCRIPTION] => Array ( [0] => unloading ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 6288 ) [~DESCRIPTION] => Array ( [0] => unloading ) [~NAME] => Картинка характеристики [~DEFAULT_VALUE] => ) [LOGO_IMAGE] => Array ( [ID] => 96 [TIMESTAMP_X] => 2013-09-13 14:40:22 [IBLOCK_ID] => 26 [NAME] => Логотип [ACTIVE] => Y [SORT] => 500 [CODE] => LOGO_IMAGE [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Логотип [~DEFAULT_VALUE] => ) [VIDEOTEKA] => Array ( [ID] => 107 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Видеотека (карточка товара) [ACTIVE] => Y [SORT] => 500 [CODE] => VIDEOTEKA [DEFAULT_VALUE] => [PROPERTY_TYPE] => G [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 38 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Видеотека (карточка товара) [~DEFAULT_VALUE] => ) [SOFT] => Array ( [ID] => 116 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Программа [ACTIVE] => Y [SORT] => 500 [CODE] => SOFT [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => Y [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12090 [VALUE] => Array ( [TEXT] => <table class="soft"> <tbody> <tr><td> <p align="justify">The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.); <br /> </p> <p align="justify">There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse; <br /> </p> <div align="justify">The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient; <br /> </div> </td><td> <div align="center" style="margin-left: 20px;"> <a rel="lightbox" href="/upload/medialibrary/687/6873f349d4d27cb3e412561c5f062aad.jpg" ><img src="/upload/medialibrary/687/6873f349d4d27cb3e412561c5f062aad.jpg" title="1" border="0" alt="b023-3l-709-1.jpg" width="300" /> <br /> </a> <br /> </div> </td></tr> <tr><td align="justify"> <div align="justify">All control elements are animated as graphic blocks where all parameters are logically grouped; <br /> </div> <div align="justify">In the screen central part the control system of the loader is located. By &quot;dragging&quot; it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc. <br /> </div> </td><td> <div align="center" style="margin-left: 20px;"> <a rel="lightbox" href="/upload/medialibrary/1ca/1ca826e4b89f104ebdff3b2e4759f33f.jpg" ><img src="/upload/medialibrary/1ca/1ca826e4b89f104ebdff3b2e4759f33f.jpg" title="2" border="0" alt="b023-3l-709-3.jpg" width="300" /> <br /> </a> <br /> </div> </td></tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.);

There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse;

The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient;
All control elements are animated as graphic blocks where all parameters are logically grouped;
In the screen central part the control system of the loader is located. By "dragging" it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc.
[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Программа [~DEFAULT_VALUE] => ) [VIDEO_YT] => Array ( [ID] => 213 [TIMESTAMP_X] => 2016-06-28 12:35:44 [IBLOCK_ID] => 26 [NAME] => Видео YouTube [ACTIVE] => Y [SORT] => 500 [CODE] => VIDEO_YT [DEFAULT_VALUE] => [PROPERTY_TYPE] => G [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 63 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Видео YouTube [~DEFAULT_VALUE] => ) ) [DISPLAY_PROPERTIES] => Array ( [TECH_DATA] => Array ( [ID] => 74 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Технические данные [ACTIVE] => Y [SORT] => 500 [CODE] => TECH_DATA [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12088 [VALUE] => Array ( [TEXT] => <table class="tech_data"> <tbody> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>The main data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Unloader dimensions (LхWхH)<strong></strong></p> </td> <td width="319" valign="top"> <p>1340 х 1370 х 1650 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Unloader weight<strong></strong></p> </td> <td width="319" valign="top"> <p>230 kg<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Interface<strong></strong></p> </td> <td width="319" valign="top"> <p>SMEMА<strong> </strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Power supply<strong></strong></p> </td> <td width="319" valign="top"> <p>220 V, 50/60 Hz<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Power consumption<strong></strong></p> </td> <td width="319" valign="top"> <p>1,1  kW<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Compressed air supply</p> </td> <td width="319" valign="top"> <p>6-8 Bar</p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB transport height<strong></strong></p> </td> <td width="319" valign="top"> <p>935 ± 35 mm<strong></strong></p> </td> </tr> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>Magazine data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine length<strong></strong></p> </td> <td width="319" valign="top"> <p>535 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine depth<strong></strong></p> </td> <td width="319" valign="top"> <p>580 mm</p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine height<strong></strong></p> </td> <td width="319" valign="top"> <p>570 mm</p> </td> </tr> <tr> <td width="319" valign="top"> <p>Magazine weight<strong></strong></p> </td> <td width="319" valign="top"> <p>max. 40 kg<strong></strong></p> </td> </tr> <tr> <td width="638" valign="top" colspan="3"> <p align="center"><strong>PCB data</strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB size (L х W<strong></strong></p> </td> <td width="319" valign="top"> <p>min. 10х522 mm,  max. 510х522 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB thickness<strong></strong></p> </td> <td width="319" valign="top"> <p>0,4-6 mm<strong></strong></p> </td> </tr> <tr> <td width="319" valign="top"> <p>PCB weight<strong></strong></p> </td> <td width="319" valign="top"> <p>max. 5 kg<strong></strong></p> </td> </tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The main data

Unloader dimensions (LхWхH)

1340 х 1370 х 1650 mm

Unloader weight

230 kg

Interface

SMEMА

Power supply

220 V, 50/60 Hz

Power consumption

1,1  kW

Compressed air supply

6-8 Bar

PCB transport height

935 ± 35 mm

Magazine data

Magazine length

535 mm

Magazine depth

580 mm

Magazine height

570 mm

Magazine weight

max. 40 kg

PCB data

PCB size (L х W

min. 10х522 mm,  max. 510х522 mm

PCB thickness

0,4-6 mm

PCB weight

max. 5 kg

[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Технические данные [~DEFAULT_VALUE] => [DISPLAY_VALUE] =>

The main data

Unloader dimensions (LхWхH)

1340 х 1370 х 1650 mm

Unloader weight

230 kg

Interface

SMEMА

Power supply

220 V, 50/60 Hz

Power consumption

1,1  kW

Compressed air supply

6-8 Bar

PCB transport height

935 ± 35 mm

Magazine data

Magazine length

535 mm

Magazine depth

580 mm

Magazine height

570 mm

Magazine weight

max. 40 kg

PCB data

PCB size (L х W

min. 10х522 mm,  max. 510х522 mm

PCB thickness

0,4-6 mm

PCB weight

max. 5 kg

) [IMAGE_CHAR] => Array ( [ID] => 77 [TIMESTAMP_X] => 2013-09-02 13:12:06 [IBLOCK_ID] => 26 [NAME] => Картинка характеристики [ACTIVE] => Y [SORT] => 500 [CODE] => IMAGE_CHAR [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => Y [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 12093 ) [VALUE] => Array ( [0] => 6288 ) [DESCRIPTION] => Array ( [0] => unloading ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 6288 ) [~DESCRIPTION] => Array ( [0] => unloading ) [~NAME] => Картинка характеристики [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Загрузить [FILE_VALUE] => Array ( [ID] => 6288 [TIMESTAMP_X] => 20.02.2015 14:37:58 [MODULE_ID] => iblock [HEIGHT] => 22 [WIDTH] => 22 [FILE_SIZE] => 316 [CONTENT_TYPE] => image/png [SUBDIR] => iblock/887 [FILE_NAME] => 8873b3a95feb49058d615bf31e277d31.png [ORIGINAL_NAME] => c36428b8e65a6b4e95687ff83908ea74.png [DESCRIPTION] => unloading [HANDLER_ID] => [EXTERNAL_ID] => [~src] => [SRC] => /upload/iblock/887/8873b3a95feb49058d615bf31e277d31.png ) ) [ZOOM] => Array ( [ID] => 73 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Увеличенное фото в карточке товара (zoom) [ACTIVE] => Y [SORT] => 500 [CODE] => ZOOM [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12087 [VALUE] => 9470 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 9470 [~DESCRIPTION] => [~NAME] => Увеличенное фото в карточке товара (zoom) [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Загрузить [FILE_VALUE] => Array ( [ID] => 9470 [TIMESTAMP_X] => 17.02.2017 15:10:15 [MODULE_ID] => iblock [HEIGHT] => 1082 [WIDTH] => 887 [FILE_SIZE] => 116769 [CONTENT_TYPE] => image/jpeg [SUBDIR] => iblock/479 [FILE_NAME] => 47947f41b4a558b2f1cf01499e53efe4.jpg [ORIGINAL_NAME] => big.jpg [DESCRIPTION] => [HANDLER_ID] => [EXTERNAL_ID] => 49f3000567bb6697ff5a0336e4e6c9e4 [~src] => [SRC] => /upload/iblock/479/47947f41b4a558b2f1cf01499e53efe4.jpg ) ) [SOFT] => Array ( [ID] => 116 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Программа [ACTIVE] => Y [SORT] => 500 [CODE] => SOFT [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => Y [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12090 [VALUE] => Array ( [TEXT] => <table class="soft"> <tbody> <tr><td> <p align="justify">The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.); <br /> </p> <p align="justify">There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse; <br /> </p> <div align="justify">The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient; <br /> </div> </td><td> <div align="center" style="margin-left: 20px;"> <a rel="lightbox" href="/upload/medialibrary/687/6873f349d4d27cb3e412561c5f062aad.jpg" ><img src="/upload/medialibrary/687/6873f349d4d27cb3e412561c5f062aad.jpg" title="1" border="0" alt="b023-3l-709-1.jpg" width="300" /> <br /> </a> <br /> </div> </td></tr> <tr><td align="justify"> <div align="justify">All control elements are animated as graphic blocks where all parameters are logically grouped; <br /> </div> <div align="justify">In the screen central part the control system of the loader is located. By &quot;dragging&quot; it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc. <br /> </div> </td><td> <div align="center" style="margin-left: 20px;"> <a rel="lightbox" href="/upload/medialibrary/1ca/1ca826e4b89f104ebdff3b2e4759f33f.jpg" ><img src="/upload/medialibrary/1ca/1ca826e4b89f104ebdff3b2e4759f33f.jpg" title="2" border="0" alt="b023-3l-709-3.jpg" width="300" /> <br /> </a> <br /> </div> </td></tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.);

There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse;

The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient;
All control elements are animated as graphic blocks where all parameters are logically grouped;
In the screen central part the control system of the loader is located. By "dragging" it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc.
[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Программа [~DEFAULT_VALUE] => [DISPLAY_VALUE] =>

The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.);

There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse;

The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient;
All control elements are animated as graphic blocks where all parameters are logically grouped;
In the screen central part the control system of the loader is located. By "dragging" it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc.
) ) [PRODUCT_PROPERTIES] => Array ( ) [PRODUCT_PROPERTIES_FILL] => Array ( ) [MORE_PHOTO] => Array ( ) [LINKED_ELEMENTS] => Array ( ) [SECTION] => Array ( [ID] => 290 [~ID] => 290 [TIMESTAMP_X] => 20.07.2016 12:30:03 [~TIMESTAMP_X] => 20.07.2016 12:30:03 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 06.07.2016 13:35:43 [~DATE_CREATE] => 06.07.2016 13:35:43 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => 45 [~IBLOCK_SECTION_ID] => 45 [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 900 [~SORT] => 900 [NAME] => Transport Systems [~NAME] => Transport Systems [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 14 [~LEFT_MARGIN] => 14 [RIGHT_MARGIN] => 15 [~RIGHT_MARGIN] => 15 [DEPTH_LEVEL] => 2 [~DEPTH_LEVEL] => 2 [DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[~DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [~SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [CODE] => transport-systems [~CODE] => transport-systems [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/transport-systems/ [~SECTION_PAGE_URL] => /en/equipment/transport-systems/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [PATH] => Array ( [0] => Array ( [ID] => 45 [~ID] => 45 [TIMESTAMP_X] => 2016-07-20 11:46:40 [~TIMESTAMP_X] => 2016-07-20 11:46:40 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 2013-09-02 09:56:05 [~DATE_CREATE] => 2013-09-02 09:56:05 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => [~IBLOCK_SECTION_ID] => [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 500 [~SORT] => 500 [NAME] => SMT equipment [~NAME] => SMT equipment [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 3 [~LEFT_MARGIN] => 3 [RIGHT_MARGIN] => 16 [~RIGHT_MARGIN] => 16 [DEPTH_LEVEL] => 1 [~DEPTH_LEVEL] => 1 [DESCRIPTION] =>

Dial-Company is a Russian SMT manufacturer. Our equipment is for different aims: from surface mount to shelf storage of products.

We have different equipments for: Stencil printing, Reflow soldering, PCBS’ Transporting, PCBs’ repairing, PCBs’ storage.

Stencil printing

SMT equipment (manual, semiautomatic and automatic) are for the process of depositing solder paste on the printed circuit boards (PCBs) in small and high volume manufacturing. Wide range of solutions and many settings make our printers multi-purpose; guarantying PCBs producing of any complexity according to a customer’s willing.

Reflow soldering

The main SMT equipment for reflow soldering is a reflow oven “ETNA”. It has conveyor system, transporting PCBs between the thermal zones. The definite number of each of the zones (preheat, thermal soak (often shortened to just soak), reflow, and cooling), the system of establishment of inert atmosphere while soldering, the type of conveyor (wire-belt, chain or mixed) help to choose an oven even for specific products.

Transport equipment

There are 2 types of SMT transport equipment: conveyor systems and PCBs loaders/unloaders. The main aim is to load the PCB’s into the production line, transporting them between other equipment in the line, unload and pushing PCBs into the magazine racks. At the time of order a customer can adjust the width and the length of the conveyor system. Loaders and unloaders provide a desired automation level for high volume manufacturing.

Automatic service stations

The main aim of this equipment is operating with electronic SMD elements on the PCBs: removal and installation of electronic components, PCBs repair of any complexity.

Drying ovens

Drying ovens are for drying of fluid, hard and granular materials, which need heat treating.

Dry storage cabinets

Dry storage cabinets are safeguard for the components and electrical performance of the dielectrics while drying their inner environment according to the electronic production storage requirements. IP55 guaranties environmental dust and moister protection complying international standards.

Among many electronic manufacturers there is much tension around the issue where to buy SMD equipment. There is a wide choice of foreign manufactured SMT equipment for the prospective buyer and only Dial-Company offers a top-qualified SMT equipment of Russian manufacturers. It’s a great advantage of buying Russian manufactured machines at the most favorable price and 24-h/7-day service.

[~DESCRIPTION] =>

Dial-Company is a Russian SMT manufacturer. Our equipment is for different aims: from surface mount to shelf storage of products.

We have different equipments for: Stencil printing, Reflow soldering, PCBS’ Transporting, PCBs’ repairing, PCBs’ storage.

Stencil printing

SMT equipment (manual, semiautomatic and automatic) are for the process of depositing solder paste on the printed circuit boards (PCBs) in small and high volume manufacturing. Wide range of solutions and many settings make our printers multi-purpose; guarantying PCBs producing of any complexity according to a customer’s willing.

Reflow soldering

The main SMT equipment for reflow soldering is a reflow oven “ETNA”. It has conveyor system, transporting PCBs between the thermal zones. The definite number of each of the zones (preheat, thermal soak (often shortened to just soak), reflow, and cooling), the system of establishment of inert atmosphere while soldering, the type of conveyor (wire-belt, chain or mixed) help to choose an oven even for specific products.

Transport equipment

There are 2 types of SMT transport equipment: conveyor systems and PCBs loaders/unloaders. The main aim is to load the PCB’s into the production line, transporting them between other equipment in the line, unload and pushing PCBs into the magazine racks. At the time of order a customer can adjust the width and the length of the conveyor system. Loaders and unloaders provide a desired automation level for high volume manufacturing.

Automatic service stations

The main aim of this equipment is operating with electronic SMD elements on the PCBs: removal and installation of electronic components, PCBs repair of any complexity.

Drying ovens

Drying ovens are for drying of fluid, hard and granular materials, which need heat treating.

Dry storage cabinets

Dry storage cabinets are safeguard for the components and electrical performance of the dielectrics while drying their inner environment according to the electronic production storage requirements. IP55 guaranties environmental dust and moister protection complying international standards.

Among many electronic manufacturers there is much tension around the issue where to buy SMD equipment. There is a wide choice of foreign manufactured SMT equipment for the prospective buyer and only Dial-Company offers a top-qualified SMT equipment of Russian manufacturers. It’s a great advantage of buying Russian manufactured machines at the most favorable price and 24-h/7-day service.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => SMT EQUIPMENT DIAL-COMPANY [ /EN/ ] IS A RUSSIAN SMT MANUFACTURER. OUR EQUIPMENT IS FOR DIFFERENT AIMS: FROM SURFACE MOUNT TO SHELF STORAGE OF PRODUCTS. WE HAVE DIFFERENT EQUIPMENTS FOR: STENCIL PRINTING [ /EN/EQUIPMENT/SCREEN-PRINTING/ ] , REFLOW SOLDERING [ /EN/EQUIPMENT/REFLOW-SOLDERING/ ] , PCBS’ TRANSPORTING [ /EN/EQUIPMENT/TRANSPORT-SYSTEMS/ ] , PCBS’ REPAIRING [ /EN/EQUIPMENT/REPAIR-CENTERS/ ] , PCBS’ STORAGE [ /EN/EQUIPMENT/DRY-STORAGE/ ] . STENCIL PRINTING SMT EQUIPMENT (MANUAL, SEMIAUTOMATIC AND AUTOMATIC) ARE FOR THE PROCESS OF DEPOSITING SOLDER PASTE ON THE PRINTED CIRCUIT BOARDS (PCBS) IN SMALL AND HIGH VOLUME MANUFACTURING. WIDE RANGE OF SOLUTIONS AND MANY SETTINGS MAKE OUR PRINTERS MULTI-PURPOSE; GUARANTYING PCBS PRODUCING OF ANY COMPLEXITY ACCORDING TO A CUSTOMER’S WILLING. REFLOW SOLDERING THE MAIN SMT EQUIPMENT FOR REFLOW SOLDERING IS A REFLOW OVEN “ETNA”. IT HAS CONVEYOR SYSTEM, TRANSPORTING PCBS BETWEEN THE THERMAL ZONES. THE DEFINITE NUMBER OF EACH OF THE ZONES (PREHEAT, THERMAL SOAK (OFTEN SHORTENED TO JUST SOAK), REFLOW, AND COOLING), THE SYSTEM OF ESTABLISHMENT OF INERT ATMOSPHERE WHILE SOLDERING, THE TYPE OF CONVEYOR (WIRE-BELT, CHAIN OR MIXED) HELP TO CHOOSE AN OVEN EVEN FOR SPECIFIC PRODUCTS. TRANSPORT EQUIPMENT THERE ARE 2 TYPES OF SMT TRANSPORT EQUIPMENT: CONVEYOR SYSTEMS AND PCBS LOADERS/UNLOADERS. THE MAIN AIM IS TO LOAD THE PCB’S INTO THE PRODUCTION LINE, TRANSPORTING THEM BETWEEN OTHER EQUIPMENT IN THE LINE, UNLOAD AND PUSHING PCBS INTO THE MAGAZINE RACKS. AT THE TIME OF ORDER A CUSTOMER CAN ADJUST THE WIDTH AND THE LENGTH OF THE CONVEYOR SYSTEM. LOADERS AND UNLOADERS PROVIDE A DESIRED AUTOMATION LEVEL FOR HIGH VOLUME MANUFACTURING. AUTOMATIC SERVICE STATIONS THE MAIN AIM OF THIS EQUIPMENT IS OPERATING WITH ELECTRONIC SMD ELEMENTS ON THE PCBS: REMOVAL AND INSTALLATION OF ELECTRONIC COMPONENTS, PCBS REPAIR OF ANY COMPLEXITY. DRYING OVENS DRYING OVENS ARE FOR DRYING OF FLUID, HARD AND GRANULAR MATERIALS, WHICH NEED HEAT TREATING. DRY STORAGE CABINETS DRY STORAGE CABINETS ARE SAFEGUARD FOR THE COMPONENTS AND ELECTRICAL PERFORMANCE OF THE DIELECTRICS WHILE DRYING THEIR INNER ENVIRONMENT ACCORDING TO THE ELECTRONIC PRODUCTION STORAGE REQUIREMENTS. IP55 GUARANTIES ENVIRONMENTAL DUST AND MOISTER PROTECTION COMPLYING INTERNATIONAL STANDARDS. AMONG MANY ELECTRONIC MANUFACTURERS THERE IS MUCH TENSION AROUND THE ISSUE WHERE TO BUY SMD EQUIPMENT. THERE IS A WIDE CHOICE OF FOREIGN MANUFACTURED SMT EQUIPMENT FOR THE PROSPECTIVE BUYER AND ONLY DIAL-COMPANY OFFERS A TOP-QUALIFIED SMT EQUIPMENT OF RUSSIAN MANUFACTURERS. IT’S A GREAT ADVANTAGE OF BUYING RUSSIAN MANUFACTURED MACHINES AT THE MOST FAVORABLE PRICE AND 24-H/7-DAY SERVICE. [~SEARCHABLE_CONTENT] => SMT EQUIPMENT DIAL-COMPANY [ /EN/ ] IS A RUSSIAN SMT MANUFACTURER. OUR EQUIPMENT IS FOR DIFFERENT AIMS: FROM SURFACE MOUNT TO SHELF STORAGE OF PRODUCTS. WE HAVE DIFFERENT EQUIPMENTS FOR: STENCIL PRINTING [ /EN/EQUIPMENT/SCREEN-PRINTING/ ] , REFLOW SOLDERING [ /EN/EQUIPMENT/REFLOW-SOLDERING/ ] , PCBS’ TRANSPORTING [ /EN/EQUIPMENT/TRANSPORT-SYSTEMS/ ] , PCBS’ REPAIRING [ /EN/EQUIPMENT/REPAIR-CENTERS/ ] , PCBS’ STORAGE [ /EN/EQUIPMENT/DRY-STORAGE/ ] . STENCIL PRINTING SMT EQUIPMENT (MANUAL, SEMIAUTOMATIC AND AUTOMATIC) ARE FOR THE PROCESS OF DEPOSITING SOLDER PASTE ON THE PRINTED CIRCUIT BOARDS (PCBS) IN SMALL AND HIGH VOLUME MANUFACTURING. WIDE RANGE OF SOLUTIONS AND MANY SETTINGS MAKE OUR PRINTERS MULTI-PURPOSE; GUARANTYING PCBS PRODUCING OF ANY COMPLEXITY ACCORDING TO A CUSTOMER’S WILLING. REFLOW SOLDERING THE MAIN SMT EQUIPMENT FOR REFLOW SOLDERING IS A REFLOW OVEN “ETNA”. IT HAS CONVEYOR SYSTEM, TRANSPORTING PCBS BETWEEN THE THERMAL ZONES. THE DEFINITE NUMBER OF EACH OF THE ZONES (PREHEAT, THERMAL SOAK (OFTEN SHORTENED TO JUST SOAK), REFLOW, AND COOLING), THE SYSTEM OF ESTABLISHMENT OF INERT ATMOSPHERE WHILE SOLDERING, THE TYPE OF CONVEYOR (WIRE-BELT, CHAIN OR MIXED) HELP TO CHOOSE AN OVEN EVEN FOR SPECIFIC PRODUCTS. TRANSPORT EQUIPMENT THERE ARE 2 TYPES OF SMT TRANSPORT EQUIPMENT: CONVEYOR SYSTEMS AND PCBS LOADERS/UNLOADERS. THE MAIN AIM IS TO LOAD THE PCB’S INTO THE PRODUCTION LINE, TRANSPORTING THEM BETWEEN OTHER EQUIPMENT IN THE LINE, UNLOAD AND PUSHING PCBS INTO THE MAGAZINE RACKS. AT THE TIME OF ORDER A CUSTOMER CAN ADJUST THE WIDTH AND THE LENGTH OF THE CONVEYOR SYSTEM. LOADERS AND UNLOADERS PROVIDE A DESIRED AUTOMATION LEVEL FOR HIGH VOLUME MANUFACTURING. AUTOMATIC SERVICE STATIONS THE MAIN AIM OF THIS EQUIPMENT IS OPERATING WITH ELECTRONIC SMD ELEMENTS ON THE PCBS: REMOVAL AND INSTALLATION OF ELECTRONIC COMPONENTS, PCBS REPAIR OF ANY COMPLEXITY. DRYING OVENS DRYING OVENS ARE FOR DRYING OF FLUID, HARD AND GRANULAR MATERIALS, WHICH NEED HEAT TREATING. DRY STORAGE CABINETS DRY STORAGE CABINETS ARE SAFEGUARD FOR THE COMPONENTS AND ELECTRICAL PERFORMANCE OF THE DIELECTRICS WHILE DRYING THEIR INNER ENVIRONMENT ACCORDING TO THE ELECTRONIC PRODUCTION STORAGE REQUIREMENTS. IP55 GUARANTIES ENVIRONMENTAL DUST AND MOISTER PROTECTION COMPLYING INTERNATIONAL STANDARDS. AMONG MANY ELECTRONIC MANUFACTURERS THERE IS MUCH TENSION AROUND THE ISSUE WHERE TO BUY SMD EQUIPMENT. THERE IS A WIDE CHOICE OF FOREIGN MANUFACTURED SMT EQUIPMENT FOR THE PROSPECTIVE BUYER AND ONLY DIAL-COMPANY OFFERS A TOP-QUALIFIED SMT EQUIPMENT OF RUSSIAN MANUFACTURERS. IT’S A GREAT ADVANTAGE OF BUYING RUSSIAN MANUFACTURED MACHINES AT THE MOST FAVORABLE PRICE AND 24-H/7-DAY SERVICE. [CODE] => equipment [~CODE] => equipment [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/ [~SECTION_PAGE_URL] => /en/equipment/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [IPROPERTY_VALUES] => Array ( ) ) [1] => Array ( [ID] => 290 [~ID] => 290 [TIMESTAMP_X] => 2016-07-20 12:30:03 [~TIMESTAMP_X] => 2016-07-20 12:30:03 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 2016-07-06 13:35:43 [~DATE_CREATE] => 2016-07-06 13:35:43 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => 45 [~IBLOCK_SECTION_ID] => 45 [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 900 [~SORT] => 900 [NAME] => Transport Systems [~NAME] => Transport Systems [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 14 [~LEFT_MARGIN] => 14 [RIGHT_MARGIN] => 15 [~RIGHT_MARGIN] => 15 [DEPTH_LEVEL] => 2 [~DEPTH_LEVEL] => 2 [DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[~DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [~SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [CODE] => transport-systems [~CODE] => transport-systems [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/transport-systems/ [~SECTION_PAGE_URL] => /en/equipment/transport-systems/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [IPROPERTY_VALUES] => Array ( ) ) ) ) [CATALOG_MEASURE_RATIO] => 1 [CATALOG_MEASURE_NAME] => шт [~CATALOG_MEASURE_NAME] => шт [PRICE_MATRIX] => Array ( [ROWS] => Array ( [0] => Array ( [QUANTITY_FROM] => 0 [QUANTITY_TO] => 0 ) ) [COLS] => Array ( [1] => Array ( [ID] => 1 [NAME] => BASE [BASE] => Y [SORT] => 100 [NAME_LANG] => Розничная цена ) ) [MATRIX] => Array ( [1] => Array ( [0] => Array ( [ID] => 150 [PRICE] => 0 [DISCOUNT_PRICE] => 0 [CURRENCY] => RUB [VAT_RATE] => 0 ) ) ) [CAN_BUY] => Array ( [0] => 1 ) [AVAILABLE] => Y [CURRENCY_LIST] => Array ( ) ) [PRICES] => Array ( ) [MIN_PRICE] => [CAN_BUY] => 1 [~BUY_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=BUY&id=3425 [BUY_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=BUY&id=3425 [~ADD_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD2BASKET&id=3425 [ADD_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD2BASKET&id=3425 [LINK_URL] => link.php?PARENT_ELEMENT_ID=3425 [~SUBSCRIBE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=SUBSCRIBE_PRODUCT&id=3425 [SUBSCRIBE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=SUBSCRIBE_PRODUCT&id=3425 [~COMPARE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD_TO_COMPARE_LIST&id=3425 [COMPARE_URL] => /en/equipment/transport-systems/automatic-pcb-unloader-b023-3u-709/?action=ADD_TO_COMPARE_LIST&id=3425 [OFFERS] => Array ( ) [counterData] => Array ( [value] => eyJ1c2VyX2lkIjowLCJwcm9kdWN0X2lkIjoiMzQyNSIsImlibG9ja19pZCI6MjYsInByb2R1Y3RfdGl0bGUiOiJBdXRvbWF0aWMgUENCIHVubG9hZGVyIEIwMjMtM1UtNzA5IiwiY2F0ZWdvcnlfaWQiOiIyOTAiLCJjYXRlZ29yeSI6eyI0NSI6IlNNVCBlcXVpcG1lbnQiLCIyOTAiOiJUcmFuc3BvcnQgU3lzdGVtcyJ9LCJyZWNvbW1lbmRhdGlvbiI6MCwicHJpY2UiOm51bGwsImN1cnJlbmN5IjpudWxsfQ== [v] => 1 ) [POPUP_MESS] => Array ( [addToCart] => Купить [inCart] => Уже в корзине [delayCart] => Уже отложен [subscribe] => Подписаться [inSubscribe] => Подписан [notAvailable] => Отсутствует [addCompare] => Добавить к сравнению [inCompare] => В списке сравнения [chooseProp] => Выберите ) [DETAIL_PICTURE_280] => Array ( [SRC] => /upload/iblock/a2d/a2d365fe5cd040c4990bacda91f41ec0.png [WIDTH] => 328 [HEIGHT] => 400 ) )

This automatic system is intended for PCBs receiving from a previous line conveyor and their loading in special magazines. The unloader is equipped with automatic magazine changing system.

The table of the B023-3U-709 is equipped with an automatic extractor for PCBs loading into slots of magazine. Magazine’s moving up/down is carried out by means of the lift mechanism. The magazine is setup on the lifting platform and is fixed by mechanical clamps. Magazine presence is controlled by special sensors. Platform movement is carried out on a vertical axis with the preset step, depending on the required PCB arrangement in magazine’s slots. PCB loading can be executed in each slot, every second slot, every third slot etc. The unloader works with 3 magazines. Removal of the filled magazine and setup of the empty magazine is carried out by the operator manually.

The main data

Unloader dimensions (LхWхH)

1340 х 1370 х 1650 mm

Unloader weight

230 kg

Interface

SMEMА

Power supply

220 V, 50/60 Hz

Power consumption

1,1  kW

Compressed air supply

6-8 Bar

PCB transport height

935 ± 35 mm

Magazine data

Magazine length

535 mm

Magazine depth

580 mm

Magazine height

570 mm

Magazine weight

max. 40 kg

PCB data

PCB size (L х W

min. 10х522 mm,  max. 510х522 mm

PCB thickness

0,4-6 mm

PCB weight

max. 5 kg

The user interface is based on modern technologies with using of the touchscreen monitor (dragging, scrolling, etc.);

There is a built-in touch full alphanumeric keyboard, and also the separate digital keyboard for a direct input of digital values; it completely excludes the need of using the ordinary keyboard and a mouse;

The program is based on uniform working field where all necessary information and all necessary control elements is displayed at the same time; it minimizes need of switching between various screens for obtaining information and control the functions, what make operator’s work quicker and more convenient;
All control elements are animated as graphic blocks where all parameters are logically grouped;
In the screen central part the control system of the loader is located. By "dragging" it is possible to load or unload the next magazine, to adjust a pusher position, to see quantity of the passed slots, the initial slot, etc.