Array
(
    [ID] => 3436
    [~ID] => 3436
    [IBLOCK_ID] => 26
    [~IBLOCK_ID] => 26
    [CODE] => three-segments-intermediate-conveyor-b012-3s-1500
    [~CODE] => three-segments-intermediate-conveyor-b012-3s-1500
    [XML_ID] => 3436
    [~XML_ID] => 3436
    [NAME] => Three segments intermediate conveyor B012-3S-1500
    [~NAME] => Three segments intermediate conveyor B012-3S-1500
    [ACTIVE] => Y
    [~ACTIVE] => Y
    [DATE_ACTIVE_FROM] => 
    [~DATE_ACTIVE_FROM] => 
    [DATE_ACTIVE_TO] => 
    [~DATE_ACTIVE_TO] => 
    [SORT] => 310
    [~SORT] => 310
    [PREVIEW_TEXT] => This conveyor is used as the intermediate device and is intended for PCBs transporting between various devices of production lines. Using such conveyor systems for metal or other pallets transporting is also admissible in the case, if pallet material is not damaging conveyor belts.
    [~PREVIEW_TEXT] => This conveyor is used as the intermediate device and is intended for PCBs transporting between various devices of production lines. Using such conveyor systems for metal or other pallets transporting is also admissible in the case, if pallet material is not damaging conveyor belts.
    [PREVIEW_TEXT_TYPE] => text
    [~PREVIEW_TEXT_TYPE] => text
    [DETAIL_TEXT] => 

This conveyor is used as the intermediate device and is intended for PCBs transporting between various devices of production lines. Using such conveyor systems for metal or other pallets transporting is also admissible in the case, if pallet material is not damaging conveyor belts.

The conveyor is equipped with special sensors for PCB presence control. Conveyor width is adjusted by means of the electric drive after the operator’s command.

Receiving and transferring of PCBs is carried out according to SMEMA interface signals.

For the conveyor control the modern programmable microcontroller is used.

[~DETAIL_TEXT] =>

This conveyor is used as the intermediate device and is intended for PCBs transporting between various devices of production lines. Using such conveyor systems for metal or other pallets transporting is also admissible in the case, if pallet material is not damaging conveyor belts.

The conveyor is equipped with special sensors for PCB presence control. Conveyor width is adjusted by means of the electric drive after the operator’s command.

Receiving and transferring of PCBs is carried out according to SMEMA interface signals.

For the conveyor control the modern programmable microcontroller is used.

[DETAIL_TEXT_TYPE] => html [~DETAIL_TEXT_TYPE] => html [DATE_CREATE] => 20.02.2015 15:44:11 [~DATE_CREATE] => 20.02.2015 15:44:11 [CREATED_BY] => 1 [~CREATED_BY] => 1 [TIMESTAMP_X] => 06.07.2016 13:39:26 [~TIMESTAMP_X] => 06.07.2016 13:39:26 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [TAGS] => [~TAGS] => [IBLOCK_SECTION_ID] => 290 [~IBLOCK_SECTION_ID] => 290 [DETAIL_PAGE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/ [~DETAIL_PAGE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/ [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [DETAIL_PICTURE] => Array ( [ID] => 6305 [TIMESTAMP_X] => 20.02.2015 15:44:11 [MODULE_ID] => iblock [HEIGHT] => 304 [WIDTH] => 380 [FILE_SIZE] => 141995 [CONTENT_TYPE] => image/png [SUBDIR] => iblock/ae4 [FILE_NAME] => ae44dea728f80397440a015f42763d17.png [ORIGINAL_NAME] => de7005519bcd553ab70cbbb3070085a5-3s.png [DESCRIPTION] => [HANDLER_ID] => [EXTERNAL_ID] => [~src] => [SRC] => /upload/iblock/ae4/ae44dea728f80397440a015f42763d17.png [ALT] => Three segments intermediate conveyor B012-3S-1500 [TITLE] => Three segments intermediate conveyor B012-3S-1500 ) [~DETAIL_PICTURE] => 6305 [PREVIEW_PICTURE] => [~PREVIEW_PICTURE] => [LANG_DIR] => / [~LANG_DIR] => / [EXTERNAL_ID] => 3436 [~EXTERNAL_ID] => 3436 [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [LID] => s1 [~LID] => s1 [CATALOG_QUANTITY] => 0 [~CATALOG_QUANTITY] => 0 [CATALOG_QUANTITY_RESERVED] => 0 [~CATALOG_QUANTITY_RESERVED] => 0 [CATALOG_QUANTITY_TRACE] => Y [~CATALOG_QUANTITY_TRACE] => Y [CATALOG_QUANTITY_TRACE_ORIG] => D [~CATALOG_QUANTITY_TRACE_ORIG] => D [CATALOG_CAN_BUY_ZERO] => Y [~CATALOG_CAN_BUY_ZERO] => Y [CATALOG_CAN_BUY_ZERO_ORIG] => D [~CATALOG_CAN_BUY_ZERO_ORIG] => D [CATALOG_NEGATIVE_AMOUNT_TRACE] => Y [~CATALOG_NEGATIVE_AMOUNT_TRACE] => Y [CATALOG_NEGATIVE_AMOUNT_ORIG] => D [~CATALOG_NEGATIVE_AMOUNT_ORIG] => D [CATALOG_SUBSCRIBE] => Y [~CATALOG_SUBSCRIBE] => Y [CATALOG_SUBSCRIBE_ORIG] => D [~CATALOG_SUBSCRIBE_ORIG] => D [CATALOG_AVAILABLE] => Y [~CATALOG_AVAILABLE] => Y [CATALOG_WEIGHT] => 0 [~CATALOG_WEIGHT] => 0 [CATALOG_WIDTH] => 0 [~CATALOG_WIDTH] => 0 [CATALOG_LENGTH] => 0 [~CATALOG_LENGTH] => 0 [CATALOG_HEIGHT] => 0 [~CATALOG_HEIGHT] => 0 [CATALOG_MEASURE] => 5 [~CATALOG_MEASURE] => 5 [CATALOG_VAT] => [~CATALOG_VAT] => [CATALOG_VAT_INCLUDED] => N [~CATALOG_VAT_INCLUDED] => N [CATALOG_PRICE_TYPE] => S [~CATALOG_PRICE_TYPE] => S [CATALOG_RECUR_SCHEME_TYPE] => D [~CATALOG_RECUR_SCHEME_TYPE] => D [CATALOG_RECUR_SCHEME_LENGTH] => 0 [~CATALOG_RECUR_SCHEME_LENGTH] => 0 [CATALOG_TRIAL_PRICE_ID] => [~CATALOG_TRIAL_PRICE_ID] => [CATALOG_WITHOUT_ORDER] => N [~CATALOG_WITHOUT_ORDER] => N [CATALOG_SELECT_BEST_PRICE] => Y [~CATALOG_SELECT_BEST_PRICE] => Y [CATALOG_PURCHASING_PRICE] => 0.00 [~CATALOG_PURCHASING_PRICE] => 0.00 [CATALOG_PURCHASING_CURRENCY] => [~CATALOG_PURCHASING_CURRENCY] => [CATALOG_TYPE] => 1 [~CATALOG_TYPE] => 1 [~BUY_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=BUY&id=#ID# [BUY_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=BUY&id=#ID# [~ADD_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD2BASKET&id=#ID# [ADD_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD2BASKET&id=#ID# [~SUBSCRIBE_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=SUBSCRIBE_PRODUCT&id=#ID# [SUBSCRIBE_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=SUBSCRIBE_PRODUCT&id=#ID# [~COMPARE_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD_TO_COMPARE_LIST&id=#ID# [COMPARE_URL_TEMPLATE] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD_TO_COMPARE_LIST&id=#ID# [ACTIVE_FROM] => [ACTIVE_TO] => [CONVERT_CURRENCY] => Array ( [CURRENCY_ID] => RUB ) [MODULES] => Array ( [iblock] => 1 [catalog] => 1 [currency] => 1 [workflow] => ) [CAT_PRICES] => Array ( ) [PRICES_ALLOW] => Array ( ) [IPROPERTY_VALUES] => Array ( ) [PROPERTIES] => Array ( [TITLE] => Array ( [ID] => 69 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Заголовок окна браузера [ACTIVE] => Y [SORT] => 500 [CODE] => TITLE [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12282 [VALUE] => Three segments intermediate conveyor B012-3S-1500 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Three segments intermediate conveyor B012-3S-1500 [~DESCRIPTION] => [~NAME] => Заголовок окна браузера [~DEFAULT_VALUE] => ) [KEYWORDS] => Array ( [ID] => 70 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Ключевые слова [ACTIVE] => Y [SORT] => 500 [CODE] => KEYWORDS [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Ключевые слова [~DEFAULT_VALUE] => ) [META_DESCRIPTION] => Array ( [ID] => 71 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Мета-описание [ACTIVE] => Y [SORT] => 500 [CODE] => META_DESCRIPTION [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12283 [VALUE] => Three segments intermediate conveyor B012-3S-1500 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Three segments intermediate conveyor B012-3S-1500 [~DESCRIPTION] => [~NAME] => Мета-описание [~DEFAULT_VALUE] => ) [RECOMMEND] => Array ( [ID] => 72 [TIMESTAMP_X] => 2013-09-10 10:43:44 [IBLOCK_ID] => 26 [NAME] => Recommend with this product [ACTIVE] => Y [SORT] => 500 [CODE] => RECOMMEND [DEFAULT_VALUE] => [PROPERTY_TYPE] => E [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 26 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => EList [USER_TYPE_SETTINGS] => Array ( [size] => 10 [width] => 0 [group] => N [multiple] => Y ) [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Recommend with this product [~DEFAULT_VALUE] => ) [ZOOM] => Array ( [ID] => 73 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Увеличенное фото в карточке товара (zoom) [ACTIVE] => Y [SORT] => 500 [CODE] => ZOOM [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12284 [VALUE] => 6306 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 6306 [~DESCRIPTION] => [~NAME] => Увеличенное фото в карточке товара (zoom) [~DEFAULT_VALUE] => ) [TECH_DATA] => Array ( [ID] => 74 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Технические данные [ACTIVE] => Y [SORT] => 500 [CODE] => TECH_DATA [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12285 [VALUE] => Array ( [TEXT] => <table class="tech_data"> <tbody> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>The main data</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>Length</p> </td> <td width="242" valign="top"> <p align="center">1500 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Width</p> </td> <td width="242" valign="top"> <p align="center">800 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Height</p> </td> <td width="242" valign="top"> <p align="center">970 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB transport height</p> </td> <td width="242" valign="top"> <p align="center">935 +/- 35 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Buffer zone length</p> </td> <td width="242" valign="top"> <p align="center">500 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Segments quantity</p> </td> <td width="242" valign="top"> <p align="center">3</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB edge clearance</p> </td> <td width="242" valign="top"> <p align="center">3 mm</p> </td> </tr> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>PCB data</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB length</p> </td> <td width="242" valign="top"> <p align="center">70  -  470 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB width </p> </td> <td width="242" valign="top"> <p align="center">50  -  508 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB thickness</p> </td> <td width="242" valign="top"> <p align="center">0,4  -  6 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Max.PCB weight</p> </td> <td width="242" valign="top"> <p align="center">5 kg</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Max.PCB warpage</p> </td> <td width="242" valign="top"> <p align="center">0,5 %</p> </td> </tr> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>Connections</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>SMEMA interface</p> </td> <td width="242" valign="top"> <p align="center">Yes</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Power supply</p> </td> <td width="242" valign="top"> <p align="center">220 V, 50/60 Hz</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Power consumption</p> </td> <td width="242" valign="top"> <p align="center">250 W</p> </td> </tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The main data

Length

1500 mm

Width

800 mm

Height

970 mm

PCB transport height

935 +/- 35 mm

Buffer zone length

500 mm

Segments quantity

3

PCB edge clearance

3 mm

PCB data

PCB length

70  -  470 mm

PCB width

50  -  508 mm

PCB thickness

0,4  -  6 mm

Max.PCB weight

5 kg

Max.PCB warpage

0,5 %

Connections

SMEMA interface

Yes

Power supply

220 V, 50/60 Hz

Power consumption

250 W

[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Технические данные [~DEFAULT_VALUE] => ) [FLAGS] => Array ( [ID] => 76 [TIMESTAMP_X] => 2017-02-14 15:05:33 [IBLOCK_ID] => 26 [NAME] => Функции [ACTIVE] => Y [SORT] => 500 [CODE] => FLAGS [DEFAULT_VALUE] => [PROPERTY_TYPE] => E [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 33 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => EList [USER_TYPE_SETTINGS] => Array ( [size] => 20 [width] => 0 [group] => Y [multiple] => Y ) [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 19157 [1] => 19158 [2] => 19159 ) [VALUE] => Array ( [0] => 3429 [1] => 3430 [2] => 3432 ) [DESCRIPTION] => Array ( [0] => [1] => [2] => ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 3429 [1] => 3430 [2] => 3432 ) [~DESCRIPTION] => Array ( [0] => [1] => [2] => ) [~NAME] => Функции [~DEFAULT_VALUE] => ) [IMAGE_CHAR] => Array ( [ID] => 77 [TIMESTAMP_X] => 2013-09-02 13:12:06 [IBLOCK_ID] => 26 [NAME] => Картинка характеристики [ACTIVE] => Y [SORT] => 500 [CODE] => IMAGE_CHAR [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => Y [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 12289 ) [VALUE] => Array ( [0] => 6307 ) [DESCRIPTION] => Array ( [0] => conveyor ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 6307 ) [~DESCRIPTION] => Array ( [0] => conveyor ) [~NAME] => Картинка характеристики [~DEFAULT_VALUE] => ) [LOGO_IMAGE] => Array ( [ID] => 96 [TIMESTAMP_X] => 2013-09-13 14:40:22 [IBLOCK_ID] => 26 [NAME] => Логотип [ACTIVE] => Y [SORT] => 500 [CODE] => LOGO_IMAGE [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Логотип [~DEFAULT_VALUE] => ) [VIDEOTEKA] => Array ( [ID] => 107 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Видеотека (карточка товара) [ACTIVE] => Y [SORT] => 500 [CODE] => VIDEOTEKA [DEFAULT_VALUE] => [PROPERTY_TYPE] => G [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 38 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 19160 [VALUE] => 222 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 222 [~DESCRIPTION] => [~NAME] => Видеотека (карточка товара) [~DEFAULT_VALUE] => ) [SOFT] => Array ( [ID] => 116 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Программа [ACTIVE] => Y [SORT] => 500 [CODE] => SOFT [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => Y [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => [VALUE] => [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => [~DESCRIPTION] => [~NAME] => Программа [~DEFAULT_VALUE] => ) [VIDEO_YT] => Array ( [ID] => 213 [TIMESTAMP_X] => 2016-06-28 12:35:44 [IBLOCK_ID] => 26 [NAME] => Видео YouTube [ACTIVE] => Y [SORT] => 500 [CODE] => VIDEO_YT [DEFAULT_VALUE] => [PROPERTY_TYPE] => G [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 63 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 19161 [VALUE] => 275 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 275 [~DESCRIPTION] => [~NAME] => Видео YouTube [~DEFAULT_VALUE] => ) ) [DISPLAY_PROPERTIES] => Array ( [VIDEOTEKA] => Array ( [ID] => 107 [TIMESTAMP_X] => 2016-05-24 14:12:39 [IBLOCK_ID] => 26 [NAME] => Видеотека (карточка товара) [ACTIVE] => Y [SORT] => 500 [CODE] => VIDEOTEKA [DEFAULT_VALUE] => [PROPERTY_TYPE] => G [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 38 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 19160 [VALUE] => 222 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 222 [~DESCRIPTION] => [~NAME] => Видеотека (карточка товара) [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Конвейерные системы EN [LINK_SECTION_VALUE] => Array ( [222] => Array ( [ID] => 222 [~ID] => 222 [IBLOCK_ID] => 38 [~IBLOCK_ID] => 38 [NAME] => Конвейерные системы EN [~NAME] => Конвейерные системы EN [SECTION_PAGE_URL] => /video/list.php?SECTION_ID=222 [~SECTION_PAGE_URL] => /video/list.php?SECTION_ID=222 [PICTURE] => [~PICTURE] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [CODE] => [~CODE] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [IBLOCK_TYPE_ID] => video [~IBLOCK_TYPE_ID] => video [IBLOCK_CODE] => flypage-video [~IBLOCK_CODE] => flypage-video [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y ) ) ) [TECH_DATA] => Array ( [ID] => 74 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Технические данные [ACTIVE] => Y [SORT] => 500 [CODE] => TECH_DATA [DEFAULT_VALUE] => [PROPERTY_TYPE] => S [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => HTML [USER_TYPE_SETTINGS] => Array ( [height] => 200 ) [HINT] => [PROPERTY_VALUE_ID] => 12285 [VALUE] => Array ( [TEXT] => <table class="tech_data"> <tbody> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>The main data</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>Length</p> </td> <td width="242" valign="top"> <p align="center">1500 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Width</p> </td> <td width="242" valign="top"> <p align="center">800 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Height</p> </td> <td width="242" valign="top"> <p align="center">970 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB transport height</p> </td> <td width="242" valign="top"> <p align="center">935 +/- 35 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Buffer zone length</p> </td> <td width="242" valign="top"> <p align="center">500 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Segments quantity</p> </td> <td width="242" valign="top"> <p align="center">3</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB edge clearance</p> </td> <td width="242" valign="top"> <p align="center">3 mm</p> </td> </tr> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>PCB data</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB length</p> </td> <td width="242" valign="top"> <p align="center">70  -  470 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB width </p> </td> <td width="242" valign="top"> <p align="center">50  -  508 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>PCB thickness</p> </td> <td width="242" valign="top"> <p align="center">0,4  -  6 mm</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Max.PCB weight</p> </td> <td width="242" valign="top"> <p align="center">5 kg</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Max.PCB warpage</p> </td> <td width="242" valign="top"> <p align="center">0,5 %</p> </td> </tr> <tr> <td width="644" valign="top" colspan="3"> <p align="center"><strong>Connections</strong></p> </td> </tr> <tr> <td width="402" valign="top"> <p>SMEMA interface</p> </td> <td width="242" valign="top"> <p align="center">Yes</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Power supply</p> </td> <td width="242" valign="top"> <p align="center">220 V, 50/60 Hz</p> </td> </tr> <tr> <td width="402" valign="top"> <p>Power consumption</p> </td> <td width="242" valign="top"> <p align="center">250 W</p> </td> </tr> </tbody> </table> [TYPE] => html ) [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [TEXT] =>

The main data

Length

1500 mm

Width

800 mm

Height

970 mm

PCB transport height

935 +/- 35 mm

Buffer zone length

500 mm

Segments quantity

3

PCB edge clearance

3 mm

PCB data

PCB length

70  -  470 mm

PCB width

50  -  508 mm

PCB thickness

0,4  -  6 mm

Max.PCB weight

5 kg

Max.PCB warpage

0,5 %

Connections

SMEMA interface

Yes

Power supply

220 V, 50/60 Hz

Power consumption

250 W

[TYPE] => html ) [~DESCRIPTION] => [~NAME] => Технические данные [~DEFAULT_VALUE] => [DISPLAY_VALUE] =>

The main data

Length

1500 mm

Width

800 mm

Height

970 mm

PCB transport height

935 +/- 35 mm

Buffer zone length

500 mm

Segments quantity

3

PCB edge clearance

3 mm

PCB data

PCB length

70  -  470 mm

PCB width

50  -  508 mm

PCB thickness

0,4  -  6 mm

Max.PCB weight

5 kg

Max.PCB warpage

0,5 %

Connections

SMEMA interface

Yes

Power supply

220 V, 50/60 Hz

Power consumption

250 W

) [FLAGS] => Array ( [ID] => 76 [TIMESTAMP_X] => 2017-02-14 15:05:33 [IBLOCK_ID] => 26 [NAME] => Функции [ACTIVE] => Y [SORT] => 500 [CODE] => FLAGS [DEFAULT_VALUE] => [PROPERTY_TYPE] => E [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 33 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => EList [USER_TYPE_SETTINGS] => Array ( [size] => 20 [width] => 0 [group] => Y [multiple] => Y ) [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 19157 [1] => 19158 [2] => 19159 ) [VALUE] => Array ( [0] => 3429 [1] => 3430 [2] => 3432 ) [DESCRIPTION] => Array ( [0] => [1] => [2] => ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 3429 [1] => 3430 [2] => 3432 ) [~DESCRIPTION] => Array ( [0] => [1] => [2] => ) [~NAME] => Функции [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Array ( [0] => Microcomputer with color HR touchscreen monitor installation [1] => Remote control from head device of the line [2] => Siemens interface installation ) [LINK_ELEMENT_VALUE] => ) [IMAGE_CHAR] => Array ( [ID] => 77 [TIMESTAMP_X] => 2013-09-02 13:12:06 [IBLOCK_ID] => 26 [NAME] => Картинка характеристики [ACTIVE] => Y [SORT] => 500 [CODE] => IMAGE_CHAR [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => Y [XML_ID] => [FILE_TYPE] => jpg, gif, bmp, png, jpeg [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => Y [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => Array ( [0] => 12289 ) [VALUE] => Array ( [0] => 6307 ) [DESCRIPTION] => Array ( [0] => conveyor ) [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => Array ( [0] => 6307 ) [~DESCRIPTION] => Array ( [0] => conveyor ) [~NAME] => Картинка характеристики [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Загрузить [FILE_VALUE] => Array ( [ID] => 6307 [TIMESTAMP_X] => 20.02.2015 15:44:11 [MODULE_ID] => iblock [HEIGHT] => 22 [WIDTH] => 22 [FILE_SIZE] => 145 [CONTENT_TYPE] => image/png [SUBDIR] => iblock/486 [FILE_NAME] => 486102d975181507e2f7000004d1406a.png [ORIGINAL_NAME] => ef79b34c0b97e4a092b76a36fe411050.png [DESCRIPTION] => conveyor [HANDLER_ID] => [EXTERNAL_ID] => [~src] => [SRC] => /upload/iblock/486/486102d975181507e2f7000004d1406a.png ) ) [ZOOM] => Array ( [ID] => 73 [TIMESTAMP_X] => 2013-09-02 13:08:12 [IBLOCK_ID] => 26 [NAME] => Увеличенное фото в карточке товара (zoom) [ACTIVE] => Y [SORT] => 500 [CODE] => ZOOM [DEFAULT_VALUE] => [PROPERTY_TYPE] => F [ROW_COUNT] => 1 [COL_COUNT] => 30 [LIST_TYPE] => L [MULTIPLE] => N [XML_ID] => [FILE_TYPE] => [MULTIPLE_CNT] => 5 [TMP_ID] => [LINK_IBLOCK_ID] => 0 [WITH_DESCRIPTION] => N [SEARCHABLE] => N [FILTRABLE] => N [IS_REQUIRED] => N [VERSION] => 1 [USER_TYPE] => [USER_TYPE_SETTINGS] => [HINT] => [PROPERTY_VALUE_ID] => 12284 [VALUE] => 6306 [DESCRIPTION] => [VALUE_ENUM] => [VALUE_XML_ID] => [VALUE_SORT] => [~VALUE] => 6306 [~DESCRIPTION] => [~NAME] => Увеличенное фото в карточке товара (zoom) [~DEFAULT_VALUE] => [DISPLAY_VALUE] => Загрузить [FILE_VALUE] => Array ( [ID] => 6306 [TIMESTAMP_X] => 20.02.2015 15:44:11 [MODULE_ID] => iblock [HEIGHT] => 799 [WIDTH] => 1000 [FILE_SIZE] => 85862 [CONTENT_TYPE] => image/jpeg [SUBDIR] => iblock/f30 [FILE_NAME] => f3019749ecb4311d6af5022210f461cb.jpg [ORIGINAL_NAME] => f99fb568eaf52cf50bf26fd5ebc94cbf-3s.jpg [DESCRIPTION] => [HANDLER_ID] => [EXTERNAL_ID] => [~src] => [SRC] => /upload/iblock/f30/f3019749ecb4311d6af5022210f461cb.jpg ) ) ) [PRODUCT_PROPERTIES] => Array ( ) [PRODUCT_PROPERTIES_FILL] => Array ( ) [MORE_PHOTO] => Array ( ) [LINKED_ELEMENTS] => Array ( ) [SECTION] => Array ( [ID] => 290 [~ID] => 290 [TIMESTAMP_X] => 20.07.2016 12:30:03 [~TIMESTAMP_X] => 20.07.2016 12:30:03 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 06.07.2016 13:35:43 [~DATE_CREATE] => 06.07.2016 13:35:43 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => 45 [~IBLOCK_SECTION_ID] => 45 [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 900 [~SORT] => 900 [NAME] => Transport Systems [~NAME] => Transport Systems [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 14 [~LEFT_MARGIN] => 14 [RIGHT_MARGIN] => 15 [~RIGHT_MARGIN] => 15 [DEPTH_LEVEL] => 2 [~DEPTH_LEVEL] => 2 [DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[~DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [~SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [CODE] => transport-systems [~CODE] => transport-systems [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/transport-systems/ [~SECTION_PAGE_URL] => /en/equipment/transport-systems/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [PATH] => Array ( [0] => Array ( [ID] => 45 [~ID] => 45 [TIMESTAMP_X] => 2016-07-20 11:46:40 [~TIMESTAMP_X] => 2016-07-20 11:46:40 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 2013-09-02 09:56:05 [~DATE_CREATE] => 2013-09-02 09:56:05 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => [~IBLOCK_SECTION_ID] => [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 500 [~SORT] => 500 [NAME] => SMT equipment [~NAME] => SMT equipment [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 3 [~LEFT_MARGIN] => 3 [RIGHT_MARGIN] => 16 [~RIGHT_MARGIN] => 16 [DEPTH_LEVEL] => 1 [~DEPTH_LEVEL] => 1 [DESCRIPTION] =>

Dial-Company is a Russian SMT manufacturer. Our equipment is for different aims: from surface mount to shelf storage of products.

We have different equipments for: Stencil printing, Reflow soldering, PCBS’ Transporting, PCBs’ repairing, PCBs’ storage.

Stencil printing

SMT equipment (manual, semiautomatic and automatic) are for the process of depositing solder paste on the printed circuit boards (PCBs) in small and high volume manufacturing. Wide range of solutions and many settings make our printers multi-purpose; guarantying PCBs producing of any complexity according to a customer’s willing.

Reflow soldering

The main SMT equipment for reflow soldering is a reflow oven “ETNA”. It has conveyor system, transporting PCBs between the thermal zones. The definite number of each of the zones (preheat, thermal soak (often shortened to just soak), reflow, and cooling), the system of establishment of inert atmosphere while soldering, the type of conveyor (wire-belt, chain or mixed) help to choose an oven even for specific products.

Transport equipment

There are 2 types of SMT transport equipment: conveyor systems and PCBs loaders/unloaders. The main aim is to load the PCB’s into the production line, transporting them between other equipment in the line, unload and pushing PCBs into the magazine racks. At the time of order a customer can adjust the width and the length of the conveyor system. Loaders and unloaders provide a desired automation level for high volume manufacturing.

Automatic service stations

The main aim of this equipment is operating with electronic SMD elements on the PCBs: removal and installation of electronic components, PCBs repair of any complexity.

Drying ovens

Drying ovens are for drying of fluid, hard and granular materials, which need heat treating.

Dry storage cabinets

Dry storage cabinets are safeguard for the components and electrical performance of the dielectrics while drying their inner environment according to the electronic production storage requirements. IP55 guaranties environmental dust and moister protection complying international standards.

Among many electronic manufacturers there is much tension around the issue where to buy SMD equipment. There is a wide choice of foreign manufactured SMT equipment for the prospective buyer and only Dial-Company offers a top-qualified SMT equipment of Russian manufacturers. It’s a great advantage of buying Russian manufactured machines at the most favorable price and 24-h/7-day service.

[~DESCRIPTION] =>

Dial-Company is a Russian SMT manufacturer. Our equipment is for different aims: from surface mount to shelf storage of products.

We have different equipments for: Stencil printing, Reflow soldering, PCBS’ Transporting, PCBs’ repairing, PCBs’ storage.

Stencil printing

SMT equipment (manual, semiautomatic and automatic) are for the process of depositing solder paste on the printed circuit boards (PCBs) in small and high volume manufacturing. Wide range of solutions and many settings make our printers multi-purpose; guarantying PCBs producing of any complexity according to a customer’s willing.

Reflow soldering

The main SMT equipment for reflow soldering is a reflow oven “ETNA”. It has conveyor system, transporting PCBs between the thermal zones. The definite number of each of the zones (preheat, thermal soak (often shortened to just soak), reflow, and cooling), the system of establishment of inert atmosphere while soldering, the type of conveyor (wire-belt, chain or mixed) help to choose an oven even for specific products.

Transport equipment

There are 2 types of SMT transport equipment: conveyor systems and PCBs loaders/unloaders. The main aim is to load the PCB’s into the production line, transporting them between other equipment in the line, unload and pushing PCBs into the magazine racks. At the time of order a customer can adjust the width and the length of the conveyor system. Loaders and unloaders provide a desired automation level for high volume manufacturing.

Automatic service stations

The main aim of this equipment is operating with electronic SMD elements on the PCBs: removal and installation of electronic components, PCBs repair of any complexity.

Drying ovens

Drying ovens are for drying of fluid, hard and granular materials, which need heat treating.

Dry storage cabinets

Dry storage cabinets are safeguard for the components and electrical performance of the dielectrics while drying their inner environment according to the electronic production storage requirements. IP55 guaranties environmental dust and moister protection complying international standards.

Among many electronic manufacturers there is much tension around the issue where to buy SMD equipment. There is a wide choice of foreign manufactured SMT equipment for the prospective buyer and only Dial-Company offers a top-qualified SMT equipment of Russian manufacturers. It’s a great advantage of buying Russian manufactured machines at the most favorable price and 24-h/7-day service.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => SMT EQUIPMENT DIAL-COMPANY [ /EN/ ] IS A RUSSIAN SMT MANUFACTURER. OUR EQUIPMENT IS FOR DIFFERENT AIMS: FROM SURFACE MOUNT TO SHELF STORAGE OF PRODUCTS. WE HAVE DIFFERENT EQUIPMENTS FOR: STENCIL PRINTING [ /EN/EQUIPMENT/SCREEN-PRINTING/ ] , REFLOW SOLDERING [ /EN/EQUIPMENT/REFLOW-SOLDERING/ ] , PCBS’ TRANSPORTING [ /EN/EQUIPMENT/TRANSPORT-SYSTEMS/ ] , PCBS’ REPAIRING [ /EN/EQUIPMENT/REPAIR-CENTERS/ ] , PCBS’ STORAGE [ /EN/EQUIPMENT/DRY-STORAGE/ ] . STENCIL PRINTING SMT EQUIPMENT (MANUAL, SEMIAUTOMATIC AND AUTOMATIC) ARE FOR THE PROCESS OF DEPOSITING SOLDER PASTE ON THE PRINTED CIRCUIT BOARDS (PCBS) IN SMALL AND HIGH VOLUME MANUFACTURING. WIDE RANGE OF SOLUTIONS AND MANY SETTINGS MAKE OUR PRINTERS MULTI-PURPOSE; GUARANTYING PCBS PRODUCING OF ANY COMPLEXITY ACCORDING TO A CUSTOMER’S WILLING. REFLOW SOLDERING THE MAIN SMT EQUIPMENT FOR REFLOW SOLDERING IS A REFLOW OVEN “ETNA”. IT HAS CONVEYOR SYSTEM, TRANSPORTING PCBS BETWEEN THE THERMAL ZONES. THE DEFINITE NUMBER OF EACH OF THE ZONES (PREHEAT, THERMAL SOAK (OFTEN SHORTENED TO JUST SOAK), REFLOW, AND COOLING), THE SYSTEM OF ESTABLISHMENT OF INERT ATMOSPHERE WHILE SOLDERING, THE TYPE OF CONVEYOR (WIRE-BELT, CHAIN OR MIXED) HELP TO CHOOSE AN OVEN EVEN FOR SPECIFIC PRODUCTS. TRANSPORT EQUIPMENT THERE ARE 2 TYPES OF SMT TRANSPORT EQUIPMENT: CONVEYOR SYSTEMS AND PCBS LOADERS/UNLOADERS. THE MAIN AIM IS TO LOAD THE PCB’S INTO THE PRODUCTION LINE, TRANSPORTING THEM BETWEEN OTHER EQUIPMENT IN THE LINE, UNLOAD AND PUSHING PCBS INTO THE MAGAZINE RACKS. AT THE TIME OF ORDER A CUSTOMER CAN ADJUST THE WIDTH AND THE LENGTH OF THE CONVEYOR SYSTEM. LOADERS AND UNLOADERS PROVIDE A DESIRED AUTOMATION LEVEL FOR HIGH VOLUME MANUFACTURING. AUTOMATIC SERVICE STATIONS THE MAIN AIM OF THIS EQUIPMENT IS OPERATING WITH ELECTRONIC SMD ELEMENTS ON THE PCBS: REMOVAL AND INSTALLATION OF ELECTRONIC COMPONENTS, PCBS REPAIR OF ANY COMPLEXITY. DRYING OVENS DRYING OVENS ARE FOR DRYING OF FLUID, HARD AND GRANULAR MATERIALS, WHICH NEED HEAT TREATING. DRY STORAGE CABINETS DRY STORAGE CABINETS ARE SAFEGUARD FOR THE COMPONENTS AND ELECTRICAL PERFORMANCE OF THE DIELECTRICS WHILE DRYING THEIR INNER ENVIRONMENT ACCORDING TO THE ELECTRONIC PRODUCTION STORAGE REQUIREMENTS. IP55 GUARANTIES ENVIRONMENTAL DUST AND MOISTER PROTECTION COMPLYING INTERNATIONAL STANDARDS. AMONG MANY ELECTRONIC MANUFACTURERS THERE IS MUCH TENSION AROUND THE ISSUE WHERE TO BUY SMD EQUIPMENT. THERE IS A WIDE CHOICE OF FOREIGN MANUFACTURED SMT EQUIPMENT FOR THE PROSPECTIVE BUYER AND ONLY DIAL-COMPANY OFFERS A TOP-QUALIFIED SMT EQUIPMENT OF RUSSIAN MANUFACTURERS. IT’S A GREAT ADVANTAGE OF BUYING RUSSIAN MANUFACTURED MACHINES AT THE MOST FAVORABLE PRICE AND 24-H/7-DAY SERVICE. [~SEARCHABLE_CONTENT] => SMT EQUIPMENT DIAL-COMPANY [ /EN/ ] IS A RUSSIAN SMT MANUFACTURER. OUR EQUIPMENT IS FOR DIFFERENT AIMS: FROM SURFACE MOUNT TO SHELF STORAGE OF PRODUCTS. WE HAVE DIFFERENT EQUIPMENTS FOR: STENCIL PRINTING [ /EN/EQUIPMENT/SCREEN-PRINTING/ ] , REFLOW SOLDERING [ /EN/EQUIPMENT/REFLOW-SOLDERING/ ] , PCBS’ TRANSPORTING [ /EN/EQUIPMENT/TRANSPORT-SYSTEMS/ ] , PCBS’ REPAIRING [ /EN/EQUIPMENT/REPAIR-CENTERS/ ] , PCBS’ STORAGE [ /EN/EQUIPMENT/DRY-STORAGE/ ] . STENCIL PRINTING SMT EQUIPMENT (MANUAL, SEMIAUTOMATIC AND AUTOMATIC) ARE FOR THE PROCESS OF DEPOSITING SOLDER PASTE ON THE PRINTED CIRCUIT BOARDS (PCBS) IN SMALL AND HIGH VOLUME MANUFACTURING. WIDE RANGE OF SOLUTIONS AND MANY SETTINGS MAKE OUR PRINTERS MULTI-PURPOSE; GUARANTYING PCBS PRODUCING OF ANY COMPLEXITY ACCORDING TO A CUSTOMER’S WILLING. REFLOW SOLDERING THE MAIN SMT EQUIPMENT FOR REFLOW SOLDERING IS A REFLOW OVEN “ETNA”. IT HAS CONVEYOR SYSTEM, TRANSPORTING PCBS BETWEEN THE THERMAL ZONES. THE DEFINITE NUMBER OF EACH OF THE ZONES (PREHEAT, THERMAL SOAK (OFTEN SHORTENED TO JUST SOAK), REFLOW, AND COOLING), THE SYSTEM OF ESTABLISHMENT OF INERT ATMOSPHERE WHILE SOLDERING, THE TYPE OF CONVEYOR (WIRE-BELT, CHAIN OR MIXED) HELP TO CHOOSE AN OVEN EVEN FOR SPECIFIC PRODUCTS. TRANSPORT EQUIPMENT THERE ARE 2 TYPES OF SMT TRANSPORT EQUIPMENT: CONVEYOR SYSTEMS AND PCBS LOADERS/UNLOADERS. THE MAIN AIM IS TO LOAD THE PCB’S INTO THE PRODUCTION LINE, TRANSPORTING THEM BETWEEN OTHER EQUIPMENT IN THE LINE, UNLOAD AND PUSHING PCBS INTO THE MAGAZINE RACKS. AT THE TIME OF ORDER A CUSTOMER CAN ADJUST THE WIDTH AND THE LENGTH OF THE CONVEYOR SYSTEM. LOADERS AND UNLOADERS PROVIDE A DESIRED AUTOMATION LEVEL FOR HIGH VOLUME MANUFACTURING. AUTOMATIC SERVICE STATIONS THE MAIN AIM OF THIS EQUIPMENT IS OPERATING WITH ELECTRONIC SMD ELEMENTS ON THE PCBS: REMOVAL AND INSTALLATION OF ELECTRONIC COMPONENTS, PCBS REPAIR OF ANY COMPLEXITY. DRYING OVENS DRYING OVENS ARE FOR DRYING OF FLUID, HARD AND GRANULAR MATERIALS, WHICH NEED HEAT TREATING. DRY STORAGE CABINETS DRY STORAGE CABINETS ARE SAFEGUARD FOR THE COMPONENTS AND ELECTRICAL PERFORMANCE OF THE DIELECTRICS WHILE DRYING THEIR INNER ENVIRONMENT ACCORDING TO THE ELECTRONIC PRODUCTION STORAGE REQUIREMENTS. IP55 GUARANTIES ENVIRONMENTAL DUST AND MOISTER PROTECTION COMPLYING INTERNATIONAL STANDARDS. AMONG MANY ELECTRONIC MANUFACTURERS THERE IS MUCH TENSION AROUND THE ISSUE WHERE TO BUY SMD EQUIPMENT. THERE IS A WIDE CHOICE OF FOREIGN MANUFACTURED SMT EQUIPMENT FOR THE PROSPECTIVE BUYER AND ONLY DIAL-COMPANY OFFERS A TOP-QUALIFIED SMT EQUIPMENT OF RUSSIAN MANUFACTURERS. IT’S A GREAT ADVANTAGE OF BUYING RUSSIAN MANUFACTURED MACHINES AT THE MOST FAVORABLE PRICE AND 24-H/7-DAY SERVICE. [CODE] => equipment [~CODE] => equipment [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/ [~SECTION_PAGE_URL] => /en/equipment/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [IPROPERTY_VALUES] => Array ( ) ) [1] => Array ( [ID] => 290 [~ID] => 290 [TIMESTAMP_X] => 2016-07-20 12:30:03 [~TIMESTAMP_X] => 2016-07-20 12:30:03 [MODIFIED_BY] => 1 [~MODIFIED_BY] => 1 [DATE_CREATE] => 2016-07-06 13:35:43 [~DATE_CREATE] => 2016-07-06 13:35:43 [CREATED_BY] => 1 [~CREATED_BY] => 1 [IBLOCK_ID] => 26 [~IBLOCK_ID] => 26 [IBLOCK_SECTION_ID] => 45 [~IBLOCK_SECTION_ID] => 45 [ACTIVE] => Y [~ACTIVE] => Y [GLOBAL_ACTIVE] => Y [~GLOBAL_ACTIVE] => Y [SORT] => 900 [~SORT] => 900 [NAME] => Transport Systems [~NAME] => Transport Systems [PICTURE] => [~PICTURE] => [LEFT_MARGIN] => 14 [~LEFT_MARGIN] => 14 [RIGHT_MARGIN] => 15 [~RIGHT_MARGIN] => 15 [DEPTH_LEVEL] => 2 [~DEPTH_LEVEL] => 2 [DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[~DESCRIPTION] =>

Transport equipment from DIAL includes different equipments for different aims.

PCB loaders. They are used to load the PCB’s into the production line by picking them from standard magazine racks for following surface-mounting. Magazine racks are changed automatically.

The PCB are loaded from the table and automatically pushed from the magazine racks. A lifter platform with magazine racks goes up and down and as soon as it’s empty, the rack will be pulled back on the upper platform so it can be removed from the equipment and reloaded again.

A manually reloaded magazine rack is set onto the lower platform. The width of grippers and the position of pusher is adjusted manually (one can only control it automatically). The charging rate can be controlled with the help of software of the interface SMEMA.

PCB unloaders. They are used to unload the PCB’s out of the production line by pushing them into standard magazine racks. A controlled extractor unloads and pushes PCBs into the magazine rack with fixing of limit position, which is on the lifted platform. Motion control of lifting machine is carried out by the stepping motor with a step according to the PCB-magazine cells’ position. The unloading process can be random. This equipment is for working with 3 PCB-magazine racks. Loading and unloading of magazine racks is carried out manually by a machine-man.

Conveyor systems. Conveyor system refers to an interstage of the process line and is for the transporting printed circuit boards between the machines. It’s possible to transport other kinds of products not damaging transporting belts.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

Band and inspection conveyors. This type of equipment refers to an interstage and is for the transporting printed circuit boards between the machines of assembly line. It’s possible to transport other kinds of products not damaging transporting belts.

This type of conveyor system provides the opportunity of stopping the conveyor in case of inspecting or PCBs repair. For such purpose there is a special shelf with an illumination tool and electricity terminal mounted on the equipment.

Conveyor system (gripper width) is controlled by a modern intelligent microcontroller. The transporting of PCBs is carried out by the interface SMEMA.

[DESCRIPTION_TYPE] => html [~DESCRIPTION_TYPE] => html [SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [~SEARCHABLE_CONTENT] => TRANSPORT SYSTEMS TRANSPORT EQUIPMENT FROM DIAL INCLUDES DIFFERENT EQUIPMENTS FOR DIFFERENT AIMS. PCB LOADERS. THEY ARE USED TO LOAD THE PCB’S INTO THE PRODUCTION LINE BY PICKING THEM FROM STANDARD MAGAZINE RACKS FOR FOLLOWING SURFACE-MOUNTING. MAGAZINE RACKS ARE CHANGED AUTOMATICALLY. THE PCB ARE LOADED FROM THE TABLE AND AUTOMATICALLY PUSHED FROM THE MAGAZINE RACKS. A LIFTER PLATFORM WITH MAGAZINE RACKS GOES UP AND DOWN AND AS SOON AS IT’S EMPTY, THE RACK WILL BE PULLED BACK ON THE UPPER PLATFORM SO IT CAN BE REMOVED FROM THE EQUIPMENT AND RELOADED AGAIN. A MANUALLY RELOADED MAGAZINE RACK IS SET ONTO THE LOWER PLATFORM. THE WIDTH OF GRIPPERS AND THE POSITION OF PUSHER IS ADJUSTED MANUALLY (ONE CAN ONLY CONTROL IT AUTOMATICALLY). THE CHARGING RATE CAN BE CONTROLLED WITH THE HELP OF SOFTWARE OF THE INTERFACE SMEMA. PCB UNLOADERS. THEY ARE USED TO UNLOAD THE PCB’S OUT OF THE PRODUCTION LINE BY PUSHING THEM INTO STANDARD MAGAZINE RACKS. A CONTROLLED EXTRACTOR UNLOADS AND PUSHES PCBS INTO THE MAGAZINE RACK WITH FIXING OF LIMIT POSITION, WHICH IS ON THE LIFTED PLATFORM. MOTION CONTROL OF LIFTING MACHINE IS CARRIED OUT BY THE STEPPING MOTOR WITH A STEP ACCORDING TO THE PCB-MAGAZINE CELLS’ POSITION. THE UNLOADING PROCESS CAN BE RANDOM. THIS EQUIPMENT IS FOR WORKING WITH 3 PCB-MAGAZINE RACKS. LOADING AND UNLOADING OF MAGAZINE RACKS IS CARRIED OUT MANUALLY BY A MACHINE-MAN. CONVEYOR SYSTEMS. CONVEYOR SYSTEM REFERS TO AN INTERSTAGE OF THE PROCESS LINE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. BAND AND INSPECTION CONVEYORS. THIS TYPE OF EQUIPMENT REFERS TO AN INTERSTAGE AND IS FOR THE TRANSPORTING PRINTED CIRCUIT BOARDS BETWEEN THE MACHINES OF ASSEMBLY LINE. IT’S POSSIBLE TO TRANSPORT OTHER KINDS OF PRODUCTS NOT DAMAGING TRANSPORTING BELTS. THIS TYPE OF CONVEYOR SYSTEM PROVIDES THE OPPORTUNITY OF STOPPING THE CONVEYOR IN CASE OF INSPECTING OR PCBS REPAIR. FOR SUCH PURPOSE THERE IS A SPECIAL SHELF WITH AN ILLUMINATION TOOL AND ELECTRICITY TERMINAL MOUNTED ON THE EQUIPMENT. CONVEYOR SYSTEM (GRIPPER WIDTH) IS CONTROLLED BY A MODERN INTELLIGENT MICROCONTROLLER. THE TRANSPORTING OF PCBS IS CARRIED OUT BY THE INTERFACE SMEMA. [CODE] => transport-systems [~CODE] => transport-systems [XML_ID] => [~XML_ID] => [TMP_ID] => [~TMP_ID] => [DETAIL_PICTURE] => [~DETAIL_PICTURE] => [SOCNET_GROUP_ID] => [~SOCNET_GROUP_ID] => [LIST_PAGE_URL] => [~LIST_PAGE_URL] => [SECTION_PAGE_URL] => /en/equipment/transport-systems/ [~SECTION_PAGE_URL] => /en/equipment/transport-systems/ [IBLOCK_TYPE_ID] => catalog [~IBLOCK_TYPE_ID] => catalog [IBLOCK_CODE] => equipment-en [~IBLOCK_CODE] => equipment-en [IBLOCK_EXTERNAL_ID] => [~IBLOCK_EXTERNAL_ID] => [EXTERNAL_ID] => [~EXTERNAL_ID] => [IPROPERTY_VALUES] => Array ( ) ) ) ) [CATALOG_MEASURE_RATIO] => 1 [CATALOG_MEASURE_NAME] => шт [~CATALOG_MEASURE_NAME] => шт [PRICE_MATRIX] => Array ( [ROWS] => Array ( [0] => Array ( [QUANTITY_FROM] => 0 [QUANTITY_TO] => 0 ) ) [COLS] => Array ( [1] => Array ( [ID] => 1 [NAME] => BASE [BASE] => Y [SORT] => 100 [NAME_LANG] => Розничная цена ) ) [MATRIX] => Array ( [1] => Array ( [0] => Array ( [ID] => 156 [PRICE] => 0 [DISCOUNT_PRICE] => 0 [CURRENCY] => RUB [VAT_RATE] => 0 ) ) ) [CAN_BUY] => Array ( [0] => 1 ) [AVAILABLE] => Y [CURRENCY_LIST] => Array ( ) ) [PRICES] => Array ( ) [MIN_PRICE] => [CAN_BUY] => 1 [~BUY_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=BUY&id=3436 [BUY_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=BUY&id=3436 [~ADD_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD2BASKET&id=3436 [ADD_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD2BASKET&id=3436 [LINK_URL] => link.php?PARENT_ELEMENT_ID=3436 [~SUBSCRIBE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=SUBSCRIBE_PRODUCT&id=3436 [SUBSCRIBE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=SUBSCRIBE_PRODUCT&id=3436 [~COMPARE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD_TO_COMPARE_LIST&id=3436 [COMPARE_URL] => /en/equipment/transport-systems/three-segments-intermediate-conveyor-b012-3s-1500/?action=ADD_TO_COMPARE_LIST&id=3436 [OFFERS] => Array ( ) [counterData] => Array ( [value] => eyJ1c2VyX2lkIjowLCJwcm9kdWN0X2lkIjoiMzQzNiIsImlibG9ja19pZCI6MjYsInByb2R1Y3RfdGl0bGUiOiJUaHJlZSBzZWdtZW50cyBpbnRlcm1lZGlhdGUgY29udmV5b3IgQjAxMi0zUy0xNTAwIiwiY2F0ZWdvcnlfaWQiOiIyOTAiLCJjYXRlZ29yeSI6eyI0NSI6IlNNVCBlcXVpcG1lbnQiLCIyOTAiOiJUcmFuc3BvcnQgU3lzdGVtcyJ9LCJyZWNvbW1lbmRhdGlvbiI6MCwicHJpY2UiOm51bGwsImN1cnJlbmN5IjpudWxsfQ== [v] => 1 ) [POPUP_MESS] => Array ( [addToCart] => Купить [inCart] => Уже в корзине [delayCart] => Уже отложен [subscribe] => Подписаться [inSubscribe] => Подписан [notAvailable] => Отсутствует [addCompare] => Добавить к сравнению [inCompare] => В списке сравнения [chooseProp] => Выберите ) [DETAIL_PICTURE_280] => Array ( [SRC] => /upload/iblock/ae4/ae44dea728f80397440a015f42763d17.png [WIDTH] => 380 [HEIGHT] => 304 ) )

This conveyor is used as the intermediate device and is intended for PCBs transporting between various devices of production lines. Using such conveyor systems for metal or other pallets transporting is also admissible in the case, if pallet material is not damaging conveyor belts.

The conveyor is equipped with special sensors for PCB presence control. Conveyor width is adjusted by means of the electric drive after the operator’s command.

Receiving and transferring of PCBs is carried out according to SMEMA interface signals.

For the conveyor control the modern programmable microcontroller is used.

The main data

Length

1500 mm

Width

800 mm

Height

970 mm

PCB transport height

935 +/- 35 mm

Buffer zone length

500 mm

Segments quantity

3

PCB edge clearance

3 mm

PCB data

PCB length

70  -  470 mm

PCB width

50  -  508 mm

PCB thickness

0,4  -  6 mm

Max.PCB weight

5 kg

Max.PCB warpage

0,5 %

Connections

SMEMA interface

Yes

Power supply

220 V, 50/60 Hz

Power consumption

250 W

Operator is able to change some conveyor settings (PCB receiving and transferring speed, delay intervals)

Conveyor width can be adjusted after signal receiving from the head device (PCB loader B023-3L-709).

Conveyor communication with upstream and downstream devices of the line can be executed via Siemens signal interface.